Pro Teck Fins are surfboard fins with soft leading and trailing edges designed to enhance board performance and reduce fin cuts. The flexible trailing edge allow the water to flow smoother with less turbulence off the fin. The flexible edge also creates a "rudder action" as the water pressure bends the edge, creating tighter and more fluid turns, similar to the fins of dolphins and sharks. The flexible urethane edge also greatly reduces fin cuts compared to conventional hard edge fins.
Pro Teck fins are available in a variety of models for all levels of surfing, from the extra rigid Carbon core, rigid core Performance, medium core Power Flex, and the flexible Super Flex fins.
 State of the Art Fin Design and MaterialsPro Teck Fins are designed with state of the art computer aided (CAD) software and produced with the finest materials that do not shrink or warp. This creates fins with perfect foils that flow through the water smoothly and naturally.
Center Fin Design
The center fins have a streamlined leading and trailing edge that is soft and flexible, making the fin flow smoothly through the water.
 Side Fin DesignThe side fins are designed with a "rounded" or "radiused" leading edge that makes turns smoother and forgiving. The trailing edge is designed with an exclusive "beveled" inside edge that allows the water to release off the fin faster and smoother than conventional fins that have a flat or dull trailing edge. Pro Teck Fins are the only fins that have streamlined or "sharp" trailing edges that are soft and flexible, that will greatly reduce fin cuts!
Flexible Edges - Regular and Stiff
Pro Teck fins are available in two different flexible edges: Regular 75A and Stiff 85A. The fins rigid cores are the same, while providing two edge flexes for different surfing styles, wave conditions and board shapes.
Regular 75A Edge - yellow or tint colors. For a loose, tight turning, and forgiving ride.
Stiff 85A Edge - white or solid colors. For more drive, projection, and drawn out turns.
|
